EVS IPWeb Version 1.0 - June 2013 User Manual - Manual (Page 46)

2. Enter a duration condition in one of the following ways:
◦ Select Single Value, select a logical operator and enter a value in the Timecode
field
◦ Select Interval, select the appropriate logical operators and enter a values in the
Timecode fields.
3. Click Add.
The search condition is displayed in the Conditions field.
4. Click Save.
How to Perform a Search based on a Timecode
To set a search criterion based on a timecode, proceed as follows:
1. Click the Edit button if the parameter is already displayed in the Advanced Search
pane. Otherwise, the window will open as soon as the parameter is selected from the
Select Criteria field.
The Timecode Filter window opens, for example:
2. Enter a timecode condition in one of the following ways:
◦ Select Single Timecode and enter a timecode value
◦ Select From...to and enter a range of timecodes.
3. Click Add.
The search condition is displayed in the Conditions field.
4. Click Save.
The search is launched on the selected tree branch.
The search results are displayed in the grid/list.
38 3. Searching for Media
EVS Broadcast Equipment S.A. - June 2013 Issue 1.0.A