EVS IPWeb Version 1.0 - June 2013 User Manual - Manual (Page 33)

Area Description
4. Transfer
Status
Information This area gives indication on the transfer status of the requested
job. According to the selected Send To mode, the information can
be displayed at the bottom of the pane. The icon layout may differ
according to the target selected for the transfer.
See section "Transfer Options" on page 59.
5. Clip
thumbnail Thumbnail grabbed for the clip. Its display is optional. It depends on
the IPWeb configuration by the administrator.
6. Clip name Name of the clip.
7. Clip TC IN Timecode of the clip IN point.
8. Clip
duration Duration of the clip.
9. Bin Total
duration Total duration of the bin content.
10. Publish
button This button is used to publish or unpublish the bin content to a group
of users.
See section "Publishing a Bin" on page 58.
11. Auto Send
button This button is used to select the target destination to automatically
send a clip to a target at clip creation.
See section "Auto Send Mode" on page 59.
12. Send Bin
button This button displays a contextual menu with different options which
allow to create an EDL with the bin content or to choose the format
in which the bin content will be sent (EDL or clips). This is used to
select the target destination to send the bin content to.
See sections "Sending Bin as Clips" on page 60 and "Sending Bin
as Edit" on page 61.
13. Clear Bin
button This button is used to clear the bin content.
See section "Bins Management" on page 54
Each tab shows the list of clips present in the bin and the total duration of the bin.
IPWeb - Version 1.0 - User Manual
2. User Interface 25