ACU-RITE 100S - Manual (Page 34)

100S Turning Reference Manual 31
REFERENCE
±
Changes the sign of the entered value from
positive (+) to negative (-) or vice versa.
Numbers are positive unless a (-) appears in
front of them.
TOOL DEF
TOOL USE
CLEAR
Used to establish tool offset.
To establish which tool offset will be used.
Acts as backspace key during numeric entry;
otherwise, it clears or cancels the last operation.
ENTER
Completes numeric operations; selects next
parameter in SETUP.
. Decimal point can be used during numeric entry.
This is also used to initiate a reference mark eval-
uation.
0-9 Used to enter a distance.