Operation, Tool offset – ACU-RITE 100S User Manual
Page 22

100S
Turning Reference Manual
OPERATION
19
The
100S
can store the dimensional offset of an additional tool. This
allows you to use two tools without having to reestablish zero as you
change between them. In order for this feature to work, the tools must be
able to repeat their location when they are changed (Repeatable tooling).
To use this feature you must first select the tool number (either 0 or 1).
Tool Offset
1. Place your first tool in the tool holder.
2. Press the TOOL USE key.
3. Press 0 to select the first tool, then press ENTER.
4. Set the Datum (Absolute Zero) for all axes using this tool. See
page 13.
5. Change the tool to the second tool you will be using.
6. Press TOOL USE and enter the number 1 for the second tool.
7. Touch this tool to a diameter of known size.
8. Press the TOOL DEF key and press the X key.
9. Press the RAD/DIA key to select diameter if not already selected.
10. Enter the known diameter. Press ENTER.