ACU-RITE 100S - Manual (Page 30)

100S Turning Reference Manual 27
TROUBLESHOOTING
SETUP key E11
E12
MM key E15
E16
X key E18
E21
TOOL DEF key E22
E25
7 key E26
E28
RAD/DIA key
ABS/INCR key
9 key
8 key
ZERO key for
the X-axis
E31 6 key
E35
E36
E38
E41
E45
E46
E48
E51
E54
E55
E32
E56
TOOL USE key
5 key
4 key
Z key
E33 CLEAR key
3 key
2 key
1 key
ZERO key for
the Z-axis
± key
ENTER key
0 key
Decimal point
(.) key
Error Messages (Keypad Test)
The messages below indicate that a problem was found during the key-
pad test at startup. If an error message appears, turn the system off,
press the appropriate key to release it back into position, and then
restart the system. (Or you can press the CLEAR key to clear the error
message.) If the key does not work during normal operation, contact
your distributor for repair/replacement procedures.