ACU-RITE 100S - Manual (Page 33)

100S Turning Reference Manual 30
REFERENCE
Keypad
Here’s an overview of the 100S
keypad. Each key’s function is
described below.
ABS/INCR
Used to switch between absolute (ABS) and
incremental (INCR) measurements. The active
mode will be displayed at the top of the DRO
display.
RAD/DIA Used to switch between radius (RAD) and
diameter (DIA) dimensions. The DIA indi-
cator will light up when diameter is dis-
played.
MM
Press this key to switch the X and Z displays
between English and metric units.
X, Z
ZERO
Correspond with the scales on the X-,and
Z-axes. Used to specify a change to a particular
axis.
These keys reset the incremental or absolute
display position at “0” for the corresponding
axis.
SETUP
Provides access to the display resolution, linear
error compensation and scale count direction.