ACU-RITE 100S - Manual (Page 21)

OPERATION
100S Turning Reference Manual 18
Using Absolute Dimension Presets
You can also preset an absolute dimension from the current tool
position. Enter the distance and direction you wish to move in rela-
tion to your current position. Follow these steps:
1. Move the tool away from the workpiece.
2. Press the ABS/INCR to switch to the incremental mode and
ensure the diameter LED is on.
3. Press the X key, ensure the ABS LED is lit and press the follow-
ing key sequence: 1.760, ENTER.
4. Press Z key, ensure the ABS LED is lit and press the follow-
ing key sequence: 2.0, ENTER.
5. To begin cutting, move Z to 0, then move X to 0.