Actron CP9449 ABS BrakeScan - Manual (Page 7)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1 – 3
Safety Precautions
!
• Flammable fuel and vapors can ignite.
• Do not smoke, strike a match, or cause a spark in the
vicinity of the battery. Battery gases can ignite.
• Avoid making an accidental connection between the
battery terminals. Do not place anything on the battery.
• When removing battery cables, remove the ground
cable first.
• Avoid sparks when connecting or disconnecting
power leads to the battery.
• Make sure ignition is off, headlights and other acces-
sories are off and vehicle doors are closed before dis-
connecting the battery cables.
- This also helps prevent damage to on-board computer
systems.
• Always disconnect the battery ground cable before
servicing electrical system components.
Explosion can cause injury.
Risk of poisoning.
• If used indoors, use the Tool in locations with mechan-
ical ventilation providing at least 4 air changes per
hour. Engine exhaust contains odorless gas which can
be lethal.
• Route the exhaust outside while testing with the
engine running.
Poisoning can result in death or serious injury.
Battery acid is a highly corrosive sulfuric acid.
• Safety goggles and protective gloves must be worn by
the operator and any bystanders.
- Even if your everyday glasses have impact resistant
lenses, they are NOT safety glasses, and may not pro-
vide adequate protection.
• Make sure someone can hear you or is close enough
to provide aid when working near a battery.
• Have plenty of fresh water nearby.
! WARNING
! WARNING