Actron CP9449 ABS BrakeScan - Manual (Page 43)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 5 – 3
5
Troubleshooting
1. Place Display Face Down.
• On a non-abrasive surface.
2. Remove Battery Cover.
• Turn the phillips screw coun-
terclockwise.
• Slide battery cover off.
3. Remove Battery and Prop-
erly Discard.
4. Install New Battery.
• 9V Alkaline Battery.
5. Reinstall Battery Cover.
• Slide battery cover on.
• Install phillips screw turning it clockwise.
• Do not overtighten screw.
Tool Self-Tests
Tool Self-Tests check the display, keys, and internal memory.
✓
Refer to “System Setup” on page 3-5 of the manual for the operational pro-
cedures for the Tool self-tests.
Technical Support
• Toll-Free Number: 1-800-228-7667
• Web Address: www.actron.com