Actron CP9449 ABS BrakeScan - Manual (Page 18)

3 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3
Using the Tool
Specifications
✓
A minimum of 8.0 V is required for most vehicle control modules to operate
properly.
Power Dissipation: 5 Watts maximum.
Dimensions: Height Width Length
7/8” 3.50” 8.25”
22.56 mm 89 mm 210 mm
Included with the Tool
✓
Replacement Parts are available from the manufacturer by contacting cus-
tomer service at:
• 1-800-228-7667 (8:00 - 6:00 EST Monday - Friday)
Table 1: Specifications
Display: 128 x 64 pixel display with contrast adjust
Operating Temperature: 0 to 50 0 C (32 to 122 0 F)
Storage Temperature: -20 to 70 0 C (-4 to 158 0 F)
Internal Power: 9V Battery (not required to read codes)
External Power: 7 to 16 Volts
Table 2: Package Contents
BrakeScan Tool: Used to run diagnostics on ABS.
Vehicle Diagnostics
Cable:
Provides link between the vehicle and Tool
so the Tool can communicate with the vehi-
cle. Also supplies power to the Tool.
Carry Case: Place to store the Tool when not in use.