Actron CP9449 ABS BrakeScan - Manual (Page 6)

!
Safety Precautions
1 – 2 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Icons Used
An icon, when present, gives a graphical description of a potential hazard.
Example:
Engine systems can malfunction expelling fuel, oil vapors, hot
steam, hot toxic exhaust gases, acid, refrigerant and other
debris.
Safety goggles and protective gloves must be worn by
the operator and any bystanders. Even if everyday eye-
glasses have impact resistant lenses, they are NOT safety
glasses.
Engine systems that malfunction can cause injury.
Important Safety Messages
Risk of electric shock.
• Do not exceed voltage limits between inputs indicated
in the Specifications.
• Use extreme caution when working with circuits that
have voltage greater than 60 volts DC or 24 volts AC.
Electric shock can cause injury.
Risk of explosion.
• Safety goggles and protective clothing must be worn
by the operator and any bystanders.
- Even if everyday glasses have impact resistant lenses,
they are NOT safety glasses, and may not provide ade-
quate protection.
• Do not use this Tool in environments where explosive
vapors may collect. These areas include:
- below-ground pits.
- confined areas.
- areas that are less than 18 inches above floor.
• If used indoors, use the Tool in locations with mechan-
ical ventilation providing at least 4 air changes per
hour.
! WARNING