Actron CP9449 ABS BrakeScan - Manual (Page 23)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 7
3
Using the Tool
Display Test
The Display Test is used to check the display.
✓
The test turns on every pixel of the display.
From the System Setup menu:
1. Select Display Test.
• Press the
UP or DOWN arrow
key until Display Test is high-
lighted.
2. Start Display Test.
• Press
ENTER.
3. Look for Missing Pixels.
• All pixels display in solid black if
there are no concerns.
• Screen flips back and forth between
screens shown below.
4. Return to System Setup.
• Press the
BACK Key.
SYSTEM SETUP
Display Test
Check for missing
spots in display
Display Test
Press Back to Quit