Actron Elite AutoScanner® CP9185 - Manual (Page 74)

Global OBD II Diagnostics
4 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
4 4
From Datastream Menu:
1. Select Record Data.
•Use UP or DOWN arrow
key until Record Data is
highlighted.
•Press ENTER.
✓
Follow all instructions on display.
✓
The ScanTool can maintain only one recording. Make sure to
thoroughly review old recording before erasing.
✓
If a recording currently exists in
memory, a message prompting to
erase data is displayed.
✓
Scan Tool validates list of global PIDs from vehicle.
2. Refer to View Data to setup Custom List or View Entire List.
✓
There are 2 types of trigger methods used:
❒ Manual Trigger - allows operator to use the ENTER key to start
recording.
❒ Trigger On Codes - automatically triggers when a diagnostic
trouble code (DTC) is detected by vehicle.
✓
Trigger on Codes is not available on all vehicles.
View Data ?
Record Data
Review Data
Print Data
Datastream Menu
Record Data
A
Previous recording
in memory. Do you
want to erase it and
make a new one?
Record Data