Actron Elite AutoScanner® CP9185 - Manual (Page 166)

Chrysler Diagnostics
7 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7
Erase Codes
✓
The Erase Codes function deletes the DTCs from the vehicle’s
computer memory. Perform this function only after the systems
have been checked completely and DTCs have been docu-
mented. This function should be performed KOEO. Do not start
engine.
✓
After servicing the vehicle, erase the stored DTCs, perform a road
test, and then verify no new codes have been stored. If DTCs
return, the problem has not been corrected or other faults are
present.
From the Diagnostic Codes Menu.
1.Select Erase Codes.
•Use UP or DOWN arrow
key until Erase Codes is
highlighted.
•Press ENTER.
2. Follow the instructions.
•Press ENTER.
✓
A message confirms the codes
are erased.
3. Return to Diagnostic Codes
Menu.
•Press ENTER.
Read Codes
Pending Codes
Erase Codes
View Fre eze Data
Review Data
Print Data
Code Lookup
Diagnostic Codes Menu
Turn ignition key on.
Engine must be off
to erase codes.
Press ENTER to cont.
Erase Codes
Codes Erased.
Erase Codes