Actron Elite AutoScanner® CP9185 - Manual (Page 169)

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 7 – 13
Chrysler Diagnostics
7
2. Select Actuator to test.
•Use the UP or DOWN
arrow key.
•Press ENTER.
✓
Actuators for the engine and transmission are combined into one
list when applicable.
✓
If the actuator selected is not available for the vehicle under test,
the Scan Tool will indicate so. If the actuator is available, the Scan
Tool will energize that actuator.
✓
Use a voltmeter to test the actua-
tor for correct operation.
3. To test another actuator.
•Press BACK.
4. Return to the Device Controls Menu.
•Press BACK.
2-3 GEAR LOCK
A/C CLUTCH REL
AIR SW SOL
AIS MOTOR O/C
ALL SOLS/RELS
ALT FIELD
O2 HTR DWNSTRM
Pick Actuator Test
Testing Actuator:
AIR SW SOL
BACK to select
different actuator
Actuator Test