Actron Elite AutoScanner® CP9185 - Manual (Page 136)

Ford Historic (OBD I) Diagnostics
6 – 14 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
6
✓
Only continuous memory codes
can be erased from the vehicle
without repairing the fault. To
remove KOEO and KOER codes,
the fault must be repaired since
they only exist when a fault exists.
2. Perform the following:
1) Turn ignition key off.
2) Transmission in park (P)or
neutral (N).
3) Wait 10 seconds.
4) Turn ignition key on.
•Press ENTER after each
message.
3. Erase Memory Codes.
•Press ENTER to begin
erasing the codes.
•The procedure takes less 1
minute to run.
4. Return to the Diagnostic Codes Menu.
•Press BACK .
MECS Erase Codes
From the Diagnostic Codes Menu:.
1. Select Erase Codes.
•Use the UP or DOWN arrow
keys until Erase Codes is
highlighted.
•Press ENTER .
Only memory codes
are erasable!
Press ENTER to cont.
Erase Codes
To erase KOEO and
KOER codes, cause of
code must be fixed.
Press ENTER to cont.
Erase Codes
Precedure runs less
than 1 minute.
Time remaining: 0:41
** Erasing Codes **
Read KOEO Codes
Read KOER Codes
Erase Codes
IVSC Spe ed Ctrl
Review Data
Print Data
Code Lookup
Diagnostic Codes Menu
Erase Codes