Actron Elite AutoScanner® CP9185 User Manual
Page 69
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 5
Global OBD II Diagnostics
4
✓
Multiple PIDs may be sent if vehicle is equipped with more than one
computer module (for example a powertrain control module [PCM]
and a transmission control module [TCM]). The Scan Tool identifies
them by their identification names (ID) assigned by manufacturer (i.e.
$10 or $1A).
✓
If one or more control module stops responding, the Scan Tool
displays a message.
❒
If continuing, dashes will replace data in right hand column.
❒
If no is selected, then the Scan Tool attempts to re-establish
communication with that module.
View Entire List.
✓
View Entire List shows all supported PID data for the vehicle being
tested.
From Select Data to View menu:
1. Select Entire Data List.
•Use
UP or DOWN arrow
key until Entire Data List is
highlighted.
•Press
ENTER.
2. View PIDs on Scan Tool.
•Use
UP or DOWN arrow
key.
Entire Data List
Custom Data List
Customize Lines
English / Metric
Select Data to View
Entire Data List
15.5
A/C PRESS (V) 3.00
A/F RATIO
14:1
BARO PRESS ("Hg) 29.9
ABSLT TPS (%)
12.2
ENGINE (RPM)
2352
CALC LOAD (%)
83.1
MAF (LB/M)
0.57
A/C PRESS (psi)