Actron Elite AutoScanner® CP9185 - Manual (Page 160)

Chrysler Diagnostics
7 – 4 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7
Datastream Menu
All items marked with “-” are covered in section 3 or 4.
These items are not covered in this section.
❒ Datastream Menu
❒ View Data
❒ Record Data
❒ Sensor Test
– Review Data
– Print Data
– Tool Setup
View Data
✓
The View Data function allows the user to view the vehicle param-
eter identification (PID) data in real time. As the powertrain control
module (PCM) monitors PIDs, they are simultaneously transmitted
to the Scan Tool. The PIDs are continuously updated at the PCM’s
rate.
✓
In addition to reading codes, View Data is the most useful diag-
nostic function for isolating the cause of a vehicle operation prob-
lem. Viewing data is also used for observing sensor data and the
on/off state of switches, solenoids, and relays.
✓
View Data can be performed with the ignition key on-engine off
(KOEO) or key on engine running (KOER).
Never operate the Scan Tool while driving. Have another
person assist with the operation of the Scan Tool.
From the Datastream Menu:
1.Select View Data.
•Use UP or DOWN arrow
key until View Data is
highlighted.
•Press ENTER.
IMPORTANT
! WARNING
View Data
Record Data
Sensor Test
Review Data
Print Data
Tool Setup
Datastream Menu