Acnodes FES 5313 - Manual (Page 71)

5-10 F6 Floppy Configuration Utility
71
Supported Software: F6 Floppy Configuration
This is used to create a floppy driver diskette needed when you install W indowsÆ XP using the F6
installation method. This will allow you to install the operating system onto a hard drive when in
AHCI mode.
1. Insert a blank floppy diskette.
2. Locate for the drivers in the CD then copy them to the floppy diskette. The CD includes drivers
for both 32-bit and 64-bit operating systems.
The path to the drivers are shown below.
32-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy32
64-bit
CD Drive:\AHCI_RAID\F6FLOPPY\f6flpy64