Acpi power management configuration – Acnodes FES 5313 User Manual
Page 33
ACPI Power Management Configuration
This section is used to configure the ACPI Power Management.
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend button is pressed.
S1(POS) Enables the Power On Suspend function.
S3(STR) Enables the Suspend to RAM function.
Resume by PME
Enable this field to use the PME signal to wake up the system.
Resume by Ring
Set this field to Enabled to use the modem ring-on function. This will allow your system to power-
on to respond to calls coming through an external or internal modem.
Resume by RTC Alarm
When the system is Enabled, it uses RTC to generate a wakeup event.
This manual is related to the following products: