Lcd control – Acnodes FES 5313 User Manual
Page 46
Primary Display
Auto
When the system boots, it will automatically detects the display device.
IGFX
When the system boots, it will first initialize the onboard VGA.
PEG
When the system boots, it will first initialize the PCI Express x16 graphics card.
Internal Graphics
Keeps IGD enabled based on the setup options.
IGFX Configuration
GTT Size
Selects the GTT Size. The options are 1MB and 2 MB.
Aperture Size
This field is relevant to the memory-mapped graphics data of the AGP card installed in your system.
Leave this in its default setting.
DVMT Total Gfx Mem
This field is used to select the graphics memory size used by DVMT mode.
LCD Control
Primary IGFX Boot Display and Secondary IGFX Boot Display
The options are Disabled, CRT, EFP, LFP, EFP3 and EFP2.
LCD Panel Type
This field is used to select the type of LCD panel used by the internal graphics device.