Acnodes FES 5313 - Manual (Page 23)

Jumper Setting
Power-ON Select
Pin Definition Pin Definition
1-2 On: Power-on via power
button(default) 3-4 On: Power on via AC power; or
Power-on via Wol after G3
To power-on via WOL after G3:
1. Set JP7 pins 2 and 3 to On.
2. Set the After G3
field to Power Off/WOL.
3. Set the GbE Wake Up From S5
Enabled.
The BIOS fields are in the South Bridge Configuratio submenu (Chipset menu) of the AMI BIOS utility.
To power-on via AC Power:
1. Set JP7 pins 2 and 3 to On.
2. Set the After G3
field to Power On.
Compact Flash Card Setting
Pin Definition Pin Definition
1-2 On: Master(default) 2-3 On: Slave
JP8 is used to set the CompactFlash card to Master or Slave mode.
PS/2 Mouse and PS/2 Keyboard Ports
These ports are used to connect a PS/2 mouse and a PS/2 keyboard. The PS/2 mouse port uses IRQ12.