Acnodes FES 5313 - Manual (Page 36)

SATA Configuration
This section is used to configure SATA functions.
SATA Controller(s)
This field is used to enable or disable the Serial ATA channels.
SATA Mode Selection
IDE Mode
This option configures the Serial ATA drives as Parallel ATA storage devices.
AHCI Mode
This option allows the Serial ATA devices to use AHCI (Advanced Host Controller Interface).
RAID Mode
This option allows you to create RAID or Matrix Storage configuration on Serial ATA
devices.
If AHCI or RAID is selected in the SATA Mode Selection, it will display the following information:
Serial ATA Port 0 to Serial ATA Port 5
These fields are used to configure the connected SATA devices