Acnodes FES 5313 - Manual (Page 41)

F71879 Super IO Configuration
This section is used to configure the I/O functions supported by the onboard Super I/O chip.
Restore AC Power Loss
Off
When power returns after an AC power failure, the system s power is off. You must press the
Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state where you left
off before the power failure had occurred. If the system s power is off when AC power failure
occurs, it will remain off when power returns. If the system s power is turned on when the AC
power failure occurs, the system will power-on when the power returns.