Acnodes FES 5313 - Manual (Page 108)

8-2 ACHI Installation Guide
The installation steps below will guide you in configuring your SATA drive to AHCI mode.
1. Enter the BIOS utility and configure the SATA controller to IDE mode.
2. Install Windows XP but do not press F6.
3. Download relevant RAID/AHCI driver
files supported by the motherboard
chipset from Intel s website. Transfer
the downloaded driver files to C:\AHCI.
4. Open Device Manager and right click
on one of the Serial ATA Storage
Controllers, then select Update Driver.
If the controller you selected did not
work, try selecting another one.
5. In the Hardware Update Wizard
dialog box, select No, not this time
then click Next.