Acnodes FES 5313 - Manual (Page 15)

Front & Rear Panel PIN Definition
Pin Definition Pin Definition
1 Left audio channel 2 Ground
3 Ground 4 Right audio channel
CD-in Internal Audio Connector
The CD-in connector is used to receive audio from a CD-ROM drive, TV tuner or MPEG card.
S/PDIF Connector:
Pin Definition Pin Definition
1 +5V 2 Key
3 SPDIF out 4 Ground
5 SPDIF in
The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF port may be mounted on a card-edge
bracket. Install the card-edge bracket to an available slot at the rear of the system chassis then connect the audio cable
to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1 of the S/PDIF connector.
LVDS LCD Panel Connector
LCD/Inverter Power Connector
The system allows you to connect an LCD Display Panel by means of the LVDS LCD panel connector and the
LCD/Inverter power connector. These connectors transmit video signals and power from the system board to the LCD
Display Panel. Refer to the next page for the pin functions of these connectors.
BIOS Setting
Configure the LCD panel in the Advanced Chipset Features submenu of the BIOS. Refer to chapter 3 for more informat ion.