Count plus keys, Tool and work area set-up – RIDGID CountPlus User Manual
Page 5

Ridge Tool Company
Tools For The Professional
TM
SeeSnake
®
CounTPluS Cable-CounTeR
Tool and Work Area Set-Up
WARNING
Before use, setup the SeeSnake and work area safely to reduce the
risk of injury from shock, fire, crushing injuries or other causes and
prevent damage.
1. Check work area for adequate lighting.
2. Check for a stable, level location to firmly position the SeeSnake where it
will be stable in operation.
3. Do not connect the SeeSnake power cord in the presence of flammable
liquids, vapors, or dust that may ignite.
4. Ensure there is a clear, level, dry place for the operator that allows him to
operate clear of the cable.
5. Ensure a clear path to a power outlet that does not contain any potential
sources of damage to the power cord.
6. Use extension cords only if necessary. Use only cords rated for outside
use and of sufficient wire size.
Minimum Wire Gauge for Extension Cords
Nameplate
Amps
Total Length (in feet)
0 – 25
26 – 50
51 – 100
0 – 6
18 AWG
16 AWG
16 AWG
6 – 10
18 AWG
16 AWG
16 AWG
10 – 12
16 AWG
16 AWG
14 AWG
12 – 16
14 AWG
12 AWG
NOT RECOMMENDED
CountPlus Keys
Figure 1: CountPlus Keypad
Keypad Description
The names of the keys are shown in Figure 1. Their functions are as follows.
Text Key
Toggles Text display on or off.
Menu / Back Key
Opens the Main Menu.
Distance Key
Toggles the distance measure display on or off.
Time Key
Toggles the date-time display to show date, time, none, or
both.
Left and Right Arrows
Move through available slides to
new slide if text is being displayed. Moves through menu choices and text
characters.
Up/Edit Key
Goes directly to the editing page for existing slides, if
slide text is being displayed when pressed. Moves through menu choices or
text characters.
Down Arrow
Moves through menu choices, values and text charac-
ters in edit mode.
Zero/Select Key
Selects a highlighted menu item; initializes the
local zero-point counter. A long press (> 3 seconds) will re-zero the default
distance counter.
Up / Edit Arrow
Text Key
Menu / Back Key
Left Arrow
Distance Key
Down Arrow
Time Key
Zero / Select Key
Right Arrow
744_031-601_0A_RevA_Countplus_ma3 3
9/04/2009 10:27:32