3Com 2226 PLUS - Manual (Page 65)

Security 65
Detail
Use the Detail tab to display the RADIUS Client settings.
Figure 55 RADIUS Client Detail Screen
Configure
Use the Configure tab to configure the RADIUS settings.
The following parameters are available:
■ Max Retries – Sets the number of retries of sending
authentication requests.
■ Timeout – Sets the interval between sending
authentication requests.
■ IP Address – The IP address of the RADIUS server.
■ UDP port – The RADIUS server UDP port used for
authentication messages.
■ Key – Sets the RADIUS encryption key.
After you have filled in the parameters, click Apply to
save your changes.
Figure 56 RADIUS Client Configure Screen