3Com 2226 PLUS - Manual (Page 35)

Administration Settings 35
Backup Configuration
To save the Switch configuration settings:
1 Click Administration, then Backup Configuration on the
menu. The Backup Configuration screen appears.
Figure 12 Backup Configuration
2 Click OK. You will be prompted to provide a location
where the configuration file will be saved.
Restore Configuration
To reload configuration settings that you previously
saved to a file:
1 Click Administration, then Restore Configuration on the
menu. The Restore Configuration screen appears.
Figure 13 Restore Configuration
2 Click Browse to locate the backup file on your computer
to restore the configuration settings.
3 Click Restore to copy the configuration back to the
Switch.
For security purposes, restoring the configuration does
not change the password.
Firmware Upgrade
The Upgrade facility allows you to install on the Switch
any new releases of system firmware that 3Com may
make available.
Newer versions of firmware can be downloaded via
HTTP and copied to the Switch; the Switch will restart
and apply the newer system firmware version.
Figure 14 Upgrade Screen
1 Click Administration, then Firmware Upgrade on the
menu. The Firmware Upgrade screen appears.