3Com 10014303 User Manual

Page 55

This command declares that the local time server is the remote server specified by

X.X.X.X. X.X.X.X represents a host address, which must not be a broadcast or

multicast address, or the IP address of the reference clock. Configured with this

command, the local device is working in client mode and therefore it is up to the local

client to synchronize with the remote server rather than vice versa.

Example

Configure the local device to synchronize with the server at 128.108.22.44 and set

the version number to 3.

[3Com] ntp-service unicast-server 128.108.22.44 version 3

3Com Router Configuration Guide Addendum for V1.20