3Com 10014303 - Manual (Page 52)

4.3.2 ntp-service source-interface disable
Syntax
ntp-service source-interface disable
undo ntp-service source-interface disable
View
Interface view
Parameter
None
Description
Using the ntp-service source-interface disable command, you can disable an
interface to receive NTP messages. Using the undo ntp-service source-interface
disable command, you can enable the interface to receive NTP messages.
By default, an interface is enables to receive NTP messages.
Example
Disable Ethernet 0 to receive NTP messages.
[3Com] interface Ethernet 0
[3Com-Ethernet0] ntp-service source-interface disable
4.3.3 ntp-service unicast-peer
Syntax
ntp-service unicast-peer X.X.X.X [ version number | authentication-key keyid |
source-interface { interface-name | interface-type interface-number } | priority ] *
undo ntp-service unicast-peer X.X.X.X
View
System view
Parameter
X.X.X.X: IP address of the remote server.
3Com Router Configuration Guide Addendum for V1.20
52