3Com 10014303 - Manual (Page 20)

Standby/Primary server switchover interval
The shared key for the AAA negotiation between the router and TACACS+
Server
Set the timeout time waiting for a TACACS+ server to make a response
Specify a source IP address for all the TACACS+ packets to be transmitted
2.4.1 Create a TACACS+ server group
Before a TACACS+ server can be used to implement AAA, you should first create a
TACACS+ server group and put the TACACS+ server into the group. The router will
look up the group for a TACACS+ server to implement AAA. You can create a
maximum of 11 TACACS+ server groups.
Perform the following configuration in system view.
Table 2-2 Create a TACACS+ server group
Operation Command
Create a TACACS+ server group
by specifying its name
hwtacacs-server template template-name
Delete a TACACS+ server group
by specifying its name
undo hwtacacs server template template-name
By default, no server group is configured.
2.4.2 Add a TACACS+ Server into a TACACS+ Server Group
After a TACACS+ server group is created, you add TACACS+ servers into it. Each
group allows of a maximum of 5 servers.
Perform the following configuration in TACACS+ view.
Table 2-3 Add/Delete TACACS+ servers
Operation Command
Add a TACACS+ server into a
TACACS+ server group
host ip ip-address [ port port-number ] [ response-timeout time ]
[
shared-key key-string ] [ authen-primary | author-primary |
account-primary ]
Remove a TACACS+ server from
a TACACS+ server group undo host ip ip-address [ authen-primary | author-primary |
account-primary ]
By default, no TACACS+ Server is specified.
3Com Router Configuration Guide Addendum for V1.20
20