Specifying the media units – Xerox 4890 User Manual

Page 71

Text mode
Original mode

SETTING THE SYSTEM CONFIGURATION

XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM

4-15

Specifying the media units

This section describes the procedure for specifying the media units
you want to use for weight and size. The specified units are used on
the IPS main window.

To specify the weight and/or size units:

1. From the Configuration menu, select Media Units. The Media

Units window displays.

Figure 4-7.

Media Units window

2. For weight, select g/m

or lb as the desired units.

3. For size, select mm or in as the desired units.

4. Click Apply. A confirmation window displays.

5. Click OK to confirm your selections.