Xerox 4890 User Manual

Page 118

Text mode
Original mode

SETTING THE SYSTEM CONFIGURATION

4-62

XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM

Adding a DFA profile

The values you enter for a DFA profile are provided by the vendor of
your finishing equipment, except the Set Media Modification (SMM)
values for Finishing Functions 1 and 2 (if used). The SMM values are
specified in the job by your applications programmer.

To create a new DFA profile:

1. Locate the DFA Profile pull-down menu on the IPS main window

(below the Output Configuration pull-down menu).

Figure 4-48. DFA Profile pull-down menu

Note:

The DFA Profile menu displays only if you have DFA

enabled on your IPS.

2. From the DFA Profile pull-down menu, select any name to use

as a base for the new profile. (You will rename the new file, so
the existing file you selected to build from will not be changed.)

Figure 4-49. DFA Profile Name pull-down menu