Xerox 4890 - Manual (Page 51)

SETTING UP THE PRINTER CONTROLLER
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 3-9
Adding resident fonts
You can add resident fonts from various media including CD-ROM,
diskette (floppy), or your network. To add resident fonts to your
system, follow these steps:
1. If the fonts you want to add reside on a CD or a diskette, skip
this step. Otherwise, copy the fonts to the following location:
/var/db/fonts/input
2. Display the Resident Fonts User Interface window. (Refer to the
section “Displaying resident fonts” above.)
3. Click Add. The Resident Outline Fonts User Interface window
displays.
Figure 3-8. Resident Outline Fonts User Interface window
4. If using a CD-ROM or a diskette (floppy) as the source for the
additional fonts, insert the CD-ROM or the diskette into the
appropriate drive.