Xerox 4890 - Manual (Page 58)

SETTING THE SYSTEM CONFIGURATION
4-2 XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Privilege Modes
The IPS allows access to various functions based on a user’s
privilege level. The following Privilege Modes are available:
• User Mode — This is the default and the lowest privilege mode
at which the IPS operates. In this mode, the Configuration
menu, service-related options on the Diagnostics menu, as well
as the Trace, Service, and Debug Level options on the
Diagnostics menu are not accessible.
•
Operator Mode — In this mode, service-related options on the
Configuration and Diagnostic menus, as well as the Trace and
Debug Level options on the Diagnostics menu are not
accessible.
• Administrator Mode — In this mode, service-related options
on the Configuration and Diagnostic menus are not accessible.
•
Service Mode — In this mode, all functions are accessible.
A user’s current Privilege Mode displays on the Control Unit
Configuration section of the main window.
Figure 4-1. Control Unit Configuration section of main window
Changing the Privilege Mode
Changing your current privilege level to an Operator Mode,
Administrator Mode, or Service Mode requires a password.
To change the Privilege Mode: