Xerox 4890 - Manual (Page 37)

STARTING AND STOPPING THE SYSTEM
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 2-3
Powering off the IPS system
Do not power off the system until it has stopped printing.
Note: Powering off the system at the end of the day is not
necessary. However, doing so does not damage the system.
Always power off the system before you do any of the following:
•
Remove or install a processor part
• Remove or install an external drive unit or monitor
• Unplug the processor power cord
•
Recover from a system that does not respond to the keyboard
or the mouse
•
Prepare for an expected power outage
• Physically relocate the system.
Note: When a power outage occurs, turn off the power
switches on all your equipment. This protects your equipment
from possible power surge damage when power is restored.