Xerox 4890 - Manual (Page 100)

SETTING THE SYSTEM CONFIGURATION
4-44 XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM
Figure 4-30. Input Configuration window
3. If you need any stocks for which there are no icons in the Media
Library, create media icons for them. (Refer to the “Setting up
the Media Library” section earlier in this chapter.)
4. In the Printer Trays field (second row of boxes) on the Input
Configuration window, specify the media that has been or will
be loaded in the printer feeder trays.
Printer Trays field: This field consists of a row of boxes called
“tray cells,” each of which represents one of the printer’s feeder
trays. The number above each tray cell is the tray’s identification
number. (The number of tray cells in this field is the number of
input trays your IPS has.)
Any printer tray for which a particular stock has been identified
displays a media icon in its tray cell. A media icon graphically
represents a stock, showing its size, weight, form type, and
color.