Xerox 4890 - Manual (Page 49)

SETTING UP THE PRINTER CONTROLLER
XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 3-7
Allocating memory for resources
The Resource Limits option allows you to specify additional memory
to be used for resources such as fonts and overlays.
Note: Whatever memory you add to your resource allocation will no
longer be available for system operation.
If you wish to change the memory allocation to provide more memory
for resources, follow these steps:
1. Select Resource Limits from the Configuration pull-down menu.
The System Resource Limits window displays.
Figure 3-6. System Resource Limits window
2. Enter the amount of memory you want allocated to resources,
or click the arrows in the incremental spin box to select the
value. The range of values is 16-128 megabytes; the default is
16.
3. Click Apply.