Xerox 4890 - Manual (Page 43)

XEROX DOCUPRINT 4850/4890 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 3-1
3. 3 Setting up the Printer
Controller
This chapter describes the procedures that are required to set up
your Printer Controller to receive and process the types of print jobs
you will be running.
Tasks requiring a Controller reboot Several of the tasks accessed from pull-down menus on the IPS
main window require the Printer Controller to be rebooted to put the
new settings into effect. (The procedure for rebooting the Printer
Controller is in the “Starting and stopping the system” chapter.) You
will need to reboot after performing the tasks associated with these
selections:
Note: You can change one or more of these settings at a time
before rebooting.
Configuration menu:
•
Language (chapter 3)
•
Resolution (chapter 4)
• Optional Processing Parameters (chapter 4).
For an illustration of the Configuration menu, refer to the “Introduction
to the graphical user interface” chapter.