Section 3: operational safety information – Xerox DocuMate 752 User Manual
Page 60
Xerox Scanner User’s Guide
56
Section 3: Operational Safety Information
Your Xerox equipment and supplies have been designed and tested to
meet strict safety requirements. These include safety agency
examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow
these safety guidelines at all times:
Do These
•
Always follow all warnings and instructions that are marked on or
supplied with the equipment.
•
Before cleaning this product, unplug the product from the electrical
outlet. Always use materials specifically designated for this product,
the use of other materials may result in poor performance and create
a hazardous situation. Do not use aerosol cleaners, they may be
explosive and flammable under certain conditions.
•
Always exercise care when moving or relocating equipment. Please
contact your local Xerox Service Department to arrange relocation of
the copier to a location outside of your building.
•
Always locate the machine on a solid support surface that has
adequate strength to support the weight of the machine.
•
Always locate the machine in an area that has adequate ventilation
and room for servicing.
•
Always unplug this equipment from the electrical outlet before
cleaning.
Do Not Do These
•
Never use a ground adapter plug to connect the equipment to a
power outlet that lacks a ground connection terminal.
•
Never attempt any maintenance function that is not specifically
described in this documentation.
•
Never remove covers or guards that are fastened with screws. There
are no operator serviceable areas within these covers.
•
Never locate the machine near a radiator or any other heat source.
•
Never override or “cheat” any of the electrical or mechanical interlock
devices.
•
Never place this equipment where people might step on or trip on the
power cord.
NOTE:
Your Xerox machine is equipped with an energy saving device
to conserve power when the machine is not in use. The machine may be
left on continuously.