Xerox DocuMate 752 - Manual (Page 54)

Maintenance
50 Xerox Scanner User’s Guide
Care and Maintenance
Regular maintenance of your scanner can help to ensure continual
optimal performance.
Cleaning the Automatic Document Feeder
You may need to clean the ADF feed mechanism if your documents do
not feed easily into the ADF, or several feed in at the same time.
To clean the ADF:
1. Wet a soft cloth with some Isopropyl rubbing alcohol (95%).
2. Open the ADF cover
3. Wipe the feed roller from side to side. Rotate the roller to clean its
entire surface.
4. Wipe the ADF pad from top to bottom. Be careful not to snag the cloth
on the springs on either side of the pad.
5. Close the cover when you’re finished.
Cleaning the Scanner Glass
To ensure the best quality scanned item, wipe the entire flatbed scanner
glass with a soft, dry, clean cloth to rid the glass of dust or other debris.
If any residue remains after wiping the glass with a dry cloth, try
dampening the cloth with 95% Isopropyl rubbing alcohol and wipe off the
residue.
NOTE: Please be careful when cleaning the roller. The roller is
designed to rotate in one direction only. As you’re cleaning the roller,
make sure it rotates easily, and continue rotating it in that direction
while wiping it clean. Do NOT force the roller to rotate in the opposite
direction. Forcing the roller to rotate will damage it, and may cause the
scanner to feed pages incorrectly.