ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 63)

Chapter 3 Wizard Setup
P-2302HWUDL-P1 Series User’s Guide
63
3.3.2 Registration Complete
This screen depends on whether or not the ZyXEL Device successfully registered your SIP
account(s).
SIP Account Select a SIP account you want to configure. The SIP Settings screen appears
again for the specified SIP account. Once you finish configuring all of your SIP
accounts, click apply. The ZyXEL Device tries to register your SIP account(s). The
following screen appears.
Figure 28 VoIP Setup Wizard > Registration Test
Wait until it finishes.
< Back Click this to go to the previous screen.
Apply Click this to register your SIP account(s).
Exit Click this to close this screen and return to the main screen.
Table 19 VoIP Setup Wizard > SIP Settings
LABEL DESCRIPTION