ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 155)

Chapter 10 Phone
P-2302HWUDL-P1 Series User’s Guide
155
10.3.1.1 DECT Base Station Reset
Resetting the DECT base station erases all the details of the DECT phones registered with the
ZyXEL Device. You can do this to clear the DECT base station memory of the DECT phones
no longer used with the ZyXEL Device, for example if one of your DECT phones is lost.
When you reset the DECT base station, you will need to re-register all the phones that you
want to use with the ZyXEL Device.
"
Resetting the DECT base station does not reset the PIN you use for registering
DECT phones. You must use the last PIN you configured to register or re-
register your DECT phones.
Press the DECT base station button (refer to Figure 85 on page 154 ) for 12 seconds or more to
reset the DECT base station.
10.3.2 Using your DECT Phone
You can use your DECT phone to make calls to other DECT phones registered with the
ZyXEL Device (A). These calls are referred to as internal calls.
You can also use your DECT phone to make VoIP calls (B). For the PSTN models, you can
also make calls via the PSTN line (C). These types of calls are referred to as external calls.
Figure 87 Using Your DECT Phone
The following table summarizes the types and number of calls you can make with your DECT
phones via the ZyXEL Device.
Table 69 DECT Phone Calls Summary
TYPE OF CALL DESCRIPTION LIMITS
Internal A call between two DECT phones
registered with the ZyXEL Device
DECT base station.
Two calls.
External A call from the DECT phone to or
from a VoIP or a PSTN caller.
Two calls.
A
B
C