ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 62)

Chapter 3 Wizard Setup
P-2302HWUDL-P1 Series User’s Guide
62
3.3.1 SIP Settings
Figure 27 VoIP Setup Wizard > SIP Settings
The following table describes the labels in this screen.
Table 19 VoIP Setup Wizard > SIP Settings
LABEL DESCRIPTION
SIP1 (- SIP10)
Settings
Use this screen to configure SIP settings for up to 10 SIP accounts.
SIP Number Enter your SIP number. In the full SIP URI (like [email protected] ), this
is the part before the @ symbol. You can use up to 127 printable ASCII
characters.
SIP Server
Address
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 95 printable ASCII characters. It does not
matter whether the SIP server is a proxy, redirect or register server.
SIP Service
Domain
Enter the SIP service domain name. In the full SIP URI (like 1234@VoIP-
provider.com ), this is the part after the @ symbol. You can use up to 127 printable
ASCII Extended set characters.
Authentication
User Name Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 95 printable ASCII characters.
Password Enter the user name for registering this SIP account, exactly as it was given to
you. You can use up to 95 printable ASCII Extended set characters.
Check here to set
up SIP settings
Select this if you want to set up additional SIP accounts.