ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 159)

Chapter 10 Phone
P-2302HWUDL-P1 Series User’s Guide
159
Each field is described in the following table.
10.3.6 Phone Ext. Table Setup Screen
Each phone connected to the ZyXEL Device has an extension number so that it can be
separately identified for intercom. The default settings of extension numbers are shown in the
following table.
Table 73 Default Ext. Number
An extension number is composed of a group number and a sub number. If group number is
not enabled, the extension number is simply the sub number. You can assign a group number
to several phones and use this number to call the group of phones. When you dial a group
number, all of the phones with the same group number ring. The phone that picks up first gets
the line, and the other phones stop ringing.
Click
VoIP > Phone > Ext. Table to access this screen.
Table 72 VoIP > Phone > Region
LABEL DESCRIPTION
Region Settings Select the place in which the ZyXEL Device is located. Do not select Default.
Call Service Mode Select the mode for supplementary phone services (call hold, call waiting, call
transfer and three-way conference calls) that your VoIP service provider supports.
Europe Type - use supplementary phone services in European mode
USA Type - use supplementary phone services American mode
You might have to subscribe to these services to use them. Contact your VoIP
service provider.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
PHONE DEFAULT EXT. NUMBER
Analog Phone 1 11
Analog Phone 2 12
DECT Phone 1 21
DECT Phone 2 22
DECT Phone 3 23
DECT Phone 4 24
DECT Phone 5 25
DECT Phone 6 26