ZyXEL Communications P-2302HWUDL-P1 Series - Manual (Page 151)

Chapter 10 Phone
P-2302HWUDL-P1 Series User’s Guide
151
Figure 82 VoIP > Phone > Analog Phone
Each field is described in the following table.
10.2.2 Advanced Analog Phone Setup Screen
Use this screen to edit advanced settings for each phone port. To access this screen, click
Advanced Setup in VoIP > Phone > Analog Phone.
Table 67 VoIP > Phone > Analog Phone
LABEL DESCRIPTION
Phone Port
Settings
Select the phone port you want to see in this screen. If you change this field, the
screen automatically refreshes.
Outgoing Call Use
SIP1 - SIP10 Select the SIP accounts you want to use on this phone port when you make
phone calls. If you select more than one SIP account, the ZyXEL Device tries to
use the SIP account you registered most recently first.
Incoming Call
apply to
SIP1 - SIP10 Select the SIP accounts you want to use on this phone port when you receive
phone calls. If you select more than one source for incoming calls, there is no way
to distinguish between them when you receive phone calls.
PSTN Line Select this if you want to receive phone calls from the PSTN line (that do not use
the Internet) on this phone port. If you select more than one source for incoming
calls, there is no way to distinguish between them when you receive phone calls.
Apply Click this to save your changes and to apply them to the ZyXEL Device.
Cancel Click this to set every field in this screen to its last-saved value.
Advanced Setup Click this to edit the advanced settings for this phone port. The Advanced Analog
Phone Setup screen appears.