Olympus VS120 - Manual (Page 7)

Introduction
3 Page
11. Do not allow the power cord to become wet. An electric shock may occur.
12. Do not bend, pull, twist or crush the power cord (cable) or apply excessive force to it. The power cord may
break and result in a fire or electric shock.
13. Do not bind up the power cord when connecting it to an electric outlet.
14. If a metal scrap or other object gets into the air hole, an electric shock or malfunction may result.
Make sure that you always keep the air hole free of such foreign objects
Symbols concerning safe operation
The following symbols concerning safe operation are shown on the main body or parts of this microscope
system. Understand the meanings of each symbol to ensure safe operation of this microscope system.
Symbol Meaning
Be careful not to pinch your fingers or hand.
The surface is hot. Touching it may result in a burn.
Do not lift the stage.
Be sure to comply with the cautions described next to this symbol.
Handling or operating it in ways not specified in here may result in personal injury or
damage to the product.
The power switch is ON.
The power switch is OFF.
Caution symbol
Caution symbols are displayed on the parts that must be handled or operated with extra caution. Be sure to
observe these cautions.
Lamp housing (high temperature)
Stage (Do not lift)
Part where the caution
symbol is shown
Near the VS120-L100 cassette cover (pinch hazard)
If the caution label is stained or peeling off, contact your Olympus distributor for information
on how to replace it.