Olympus VS120 User Manual

Page 17

Preparations before Starting Observation

Page

To take slide glass specimens out of the cassette:

1. Move latch (1) on the cassette lid upward slightly with a finger to release it.

Applying a strong force to the latch may damage the latch.

2. Release the latch on the other side in the same way and remove the lid.

3. After taking all specimens out of the cassette, put the cassette lid back in place.

To place a slide glass directly on the microscope stage, use the handle of

the stage cover to open and close it.

For the procedure for placing the slide glass on the stage, refer to

VS120-S1/S5 On page 11.

Be sure not to put slide glasses on the stage cover. When the stage

cover is opened, slide glasses may drop down onto the stage.

Tighten the screws of stage cover firmly. The stage cover may come

off if screws are loosened.

When opening the stage cover, be sure not to hit a camera and the

other units.

When closing the stage cover, be sure not to pinch your hands.

This completes the preparations before starting observations.
Start observations and acquire images by following the instructions given in
the [simple operation] manual.

NOTE

(1)

TIP

NOTE

Screw