6 lamp housing inspection sheet, Lamp housing inspection sheet, 32 page – Olympus VS120 User Manual
Page 36
Lamp housing Inspection sheet
32
Page
6 Lamp housing Inspection sheet
Study the instruction manual for the lamp housing before inspection.
For safe use of the lamp housing, we recommend performing the following inspection
periodically (every time you replace
the lamp bulb and at least every 6 months).
The table below identifies the check items to be observed. Put (X) if not applicable or (
)
if applicable.
If there is any (X) mark noted, immediately stop use of the product, and contact Olympus
for detailed inspections or replace the lamp housing.
If you detect an abnormality other than that listed below or with other Olympus product,
also stop the use of the product and contact Olympus for detailed inspections.
Note that the service, replacement and detailed inspections are charged after expiration of
the warranty period.
If you have any questions, please contact Olympus.
Check results (Date)
Check
items
/ / / /
1. More than 8 years have passed since original purchase or the total
power ON time has exceeded 20,000 hours.
2. Lamp does not light sometimes even though the power switch is set
to on.
3. Illumination flickers when you move the lamp cable or lamp housing.
4. Lamp cable is unusually hot to the touch.
5. Scorching or burning odor is produced during use.
6. Illumination still flickers after replacement with a new lamp bulb.
7. Deformation, backlash, or looseness, etc. when you assemble the
lamp housing.
(Impossibility of removing the top section of lamp housing when you
attempt to replace the lamp bulb, etc.)
8. Extreme discoloration of the lamp housing connection terminal or
lamp socket.
Uneven discoloration of the left and right sections of these parts.
9. Discoloration, deformation or cracking of the lamp housing.
10. Melting, crack, deformation or solidification of the lamp cable or a
wiring part.
11. Increased frequency of servicing compared to similar devices put
into use at the same time as the lamp housing.
* When the Check Result columns become insufficient, copy this sheet.
NOTE